Cottage Beams Thick Country Cottage Natural Shelves

Thick Country Cottage – Natural Oak Floating Shelves

Choose Your Colour

Choose Your Section Size (Depth x Height)

Choose Your Length

Or Try Our Bespoke Product Builder

£66.00

Estimated Delivery: Thursday, 10th Sep - Wednesday, 16th Sep

25 Year Warranty

30 Day Money-Back Guarantee

Featuring gently rounded edges and natural splits, knots, and flecks, these shelves showcase a captivating mix of genuine farmhouse charm and sleek modern design. The Country Cottage shelves effortlessly combine classic character with contemporary smoothness, making them an ideal choice to enhance any space with timeless style.

Installing Your Oak Floating Shelf

Our oak floating shelves use a concealed fixing system, leaving a clean, bracket-free finish once installed. The load capacity and the right fixing choice both depend on your wall type and shelf size — here's how to get it right.

Marking Your Wall

We recommend waiting until your shelf has arrived before marking the wall. Place it against the wall at your chosen height and mark directly through the fixing positions — this gives you the exact centres for your specific shelf size. Fixings are positioned 100mm from each end, so if you need to plan ahead, your centre-to-centre distance is your shelf length minus 200mm.

How Many Fixings?

Shelves up to 140cm long, up to 20cm deep, and up to 4.2cm thick are supplied with 2 fixings. Shelves in the same depth and thickness range up to 2.5m long are supplied with 3 fixings.

Solid Masonry Walls (brick, block, stone)

Standard shelves come supplied with concealed steel rods ready to set into masonry. Each fixing point is rated to 12kg — giving a total capacity of 24kg on a 2-fixing installation and 36kg on a 3-fixing installation. These figures include the weight of the shelf itself, so the usable load capacity for items placed on the shelf will be slightly less. Please note that longer and deeper shelves may not reach these maximums; distribute weight evenly and avoid concentrating loads at one end.

Deeper and Thicker Shelves — 12mm Bar

Shelves over 25cm deep, and shelves 7cm thick that are over 20cm deep and over 100cm long, are supplied with 12mm steel bar rather than standard rods. These require anchor resin to set into the wall — resin is not supplied and should be sourced before installation. We recommend confirming the correct resin type with your installer or local builder's merchant before drilling.

25cm deep shelves are supplied with longer rods as standard — no additional parts are needed.

Plasterboard Walls — Finding the Studs

If you have plasterboard walls, the best outcome is locating the timber studs behind the board. Use a stud finder (widely available for under £15) to identify stud positions before marking your fixing points. Where your shelf fixings can be set into studs, use the solid wall concealed rod fixings — you'll achieve the same load capacity as a masonry installation.

Where fixing into studs isn't possible, use our plasterboard concealed shelf supports with the included wall anchors. Each fixing point is rated to 7.5kg, giving a total shelf load of up to 15kg — ideal for lighter display items such as candles, small plants, and ornaments.

If you need your fixing positions adjusted to align with your stud centres, please get in touch before ordering and we'll be happy to accommodate this on your shelf.

A Note on Wall Integrity

The figures above assume the wall is in good condition. Old or damaged masonry, crumbling mortar, or fixings placed into hollow sections of a wall will reduce load capacity significantly. If you're in any doubt about your wall condition or type, we'd recommend having your shelf installed by a qualified tradesperson — a carpenter or handyman can assess the wall, locate studs, and ensure your fixings are placed correctly for a safe, lasting result.

Alcove Shelves

Our alcove range is designed to sit between two walls, so only the front face will be profiled in your chosen style. As most walls aren't perfectly square, we recommend one of two approaches:

Shadow gap: Order or cut your shelf 5mm short of the alcove width and leave a small shadow gap at each side. Clean, intentional, and no fussing on site.

Scribing: Order the shelf slightly longer than the alcove width, then scribe it on site for a snug fit. Use an angle finder to pick up the exact angle of each wall, transfer those angles to the shelf, and trim accordingly.

Installation Guide

For a step-by-step walkthrough of the installation process, visit our installation guides page.

Kiln-Dried and Responsibly Sourced

All of our oak is kiln-dried to minimise moisture content, making it as dimensionally stable as possible before it reaches you. This means less risk of warping, twisting, or movement once installed — so your shelf stays true in a typical domestic environment. The timber is sourced from sustainably managed forests certified by the PEFC (Programme for the Endorsement of Forest Certification), ensuring it is harvested in a way that protects woodland ecosystems and ensures forests are replenished for future generations.

What to Expect from Natural Oak

Oak is a natural material, and no two pieces are identical. The character of your shelf will be shaped by the individual tree it came from — and that's what makes it special.

Colour and tone: Oak ranges from pale gold to warm honey, with occasional deeper tones depending on the part of the tree and how it's been finished. Over time, oak mellows and deepens in colour, developing a richer patina with age and light exposure.

Grain and figuring: Oak has a pronounced open grain with a natural variation in pattern. You may notice subtle silver-grey ray markings running across the grain — this is a characteristic unique to oak and a sign of quality, not a defect.

Knots and natural features: Small, tight knots are a natural part of solid timber and contribute to each shelf's individual character. Larger or open knots are assessed during production and only retained where they don't affect the structural integrity of the piece. Small knots and natural checks — fine surface splits that can occur as timber dries — may be lightly filled and sanded as part of our finishing process, giving a smooth, even surface while preserving the character of the grain.

We lightly finish our shelves to enhance the natural grain and provide protection, while keeping the honest, tactile feel of real wood. Touch-up wax is available separately if you ever need to refresh the surface.

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.